JE CUSTOM MADE Forged Pistons
JE CUSTOM MADE Forged Pistons
Scroll down for all the JE Custom Piston order listings...
Forget the imitators and low price, low quality imposters. JE is the finest forged piston made for your Street or Race engine...Normally aspirated, Turbo, Supercharged, NOS..You name it and Top-End and JE can supply you a piston to fit your needs.
We are THE source for ALL BMW Forged pistons.
There are very few pistons that we cannot custom make for you either from our huge database of engine specifications or using a sample you provide to us.
The only things we DO NOT make are Diesel and 2 Stroke pistons.
Our Minimum bore diamter is 54.229mm with a .550 wrist pin for custom forged applications.
Here is a breif list of some of the custom applications we have made pistons for. These are in addition to the common engines listed on our main JE part # listing.
Audi 4,5 V6 and V8
Alfa most models 4, 5 Cyl 20V, and 6 cyl
BMW All Models 4,6,8 and 12 Cyl
Chevrolet and GM Imports as well as all Domestic V6 and V8 engine
Cosworth (Most engines and combinations)
Fiat (Most of the popular 4 cyl Turbo and N/A engines and the 5 Cylinder Turbo)
Ferrari 308, 365 GT 2+2, Etc.
Ford X-Flow
Lancia 2.0 16V
Maserati Misc
Mercedes 190E 2.3 16 and many 6 and 8 cylinders engines like the M119, etc (We usually require samples for Mercedes engines)
Nissan CA18DET, SR20, QR25, VG33, all RB's and all "L", "A", "R" and "U" series
Nissan Skyline GTR Pistons and Rods
Opel Calibra C20 Turbo and Normally aspirated
Peugeot 16V and Misc Turbo and Non-Turbo, 406, XU10, Etc
Porsche All AirCooled Flat 4 and Flat 6, Watercooled 924, 944, etc.
Renault Misc (We usually require samples for Renault engines)
Suzuki Swift Turbo and Cappucino, Alto Works F6A
Toyota 4EFTE, Vios, 3VZE, 3TC, Etc
Volvo B18 and B204, B23T, and 5 Cyl.
VW All Watercooled and Air Cooled
Click Here for the JE Pistons Custom Piston Quote Form
JE Pistons are the finest quality aftermarket forged pistons available. The special High Silicon 2618 aircraft alloy . allows much tighter Piston-To-Wall clearances ( Typically .0035-.0045 )than all the other manufactures. This means a quiet street engine that does not need excessive temperatures to seal.
We offer and optional ($40.00 per piston at the time they are ordered or $49 per piston after they have been completed) High Heat Coating on Piston tops and Skirts. (A MUST HAVE for all NOS and High Boost Turbo engines..)You must specify this when ordering. It usually adds 7-10 days to the delivery time of a piston set.
As one of JE's biggest distributors we have very good order time on all custom sets...Our orders get priority and that means you will get your parts faster....Typically a custom set from us takes 3-4 weeks and sometimes even faster....If your piston has to be made from a sample it may take a little longer....Rush and Expedited orders are available for those engine emergencies. There is an extra fee for Rush orders but sometimes you just need them faster....
Don't see what you need? We will build a custom set of pistons for any application. Just click here to send us a
-
Bryan Taylor Custom 2 Ring Gapless Piston Set Per Drawings....
SKU: Btaylor_Custom2Ring_Deposit05-18I’ve attached 3 drawings for a set of 4 pistons. They are identical in many respects to a set you made for me in July 2013. The differences are in the pin height, now 22.1mm, the crown volume, now 9.5cc and the bore size, now 84.05mm. The rod small end thickness is 5.0mmLearn More
Could you make these with your asymmetric forgings, piston guided rods - small end width is 25.0mm - coatings on crown and skirt, 2 rings, gas ported top groove with gapless ring, round wire locks, 2RH, 2LH.$239.61 -
Jude U20 custom Stroker Flat Top Pistons
SKU: U20_JE_CustomSet of 4 Custom JE Pistons for U20 Stroker
Learn More
90mm Bore x 87mm Stroke x Custom Pauter Rod
20mm Pin x Flat Top and Zero Deck
29mm CD and 154.5mm rod length
12.26:1 with 1.2mm head gasket and 43cc chambers
7mm Top Land.$935.00 -
Frannion 2 Pieces Re-order
SKU: Frannion_2pistonsQuote: $965 + Shipping
Learn More
2 x Pistons exact same as previous
Pin Fit on both
1 x Pin and Locs for Single Piston
6 x Cylinder Ring Set.
This will give you 1 extra spare piston for the future....
5-6 week lead time$965.00 -
Buick 3.8 V6 Custom Turbo Piston Set
SKU: JE_3.8V63.820 Bore x 8.5:1 with .905 pins and 38cc Dish Learn More$989.41 -
Takeo Masame Lancia custom Set
SKU: JE_Lancia_Custom$1027 USD + $69 Shipping for 5 Pieces complete with Pins, Locs and Rings.
Learn More
Exactly per sample except made for 84.4mm Bore Size.
Approx 6-7 Weeks$1,096.00 -
6 Cylinder JE Custom Forged Piston Set - All "L" Series. L24, L26 and L28.
SKU: JE_L24L26L28_CustomAll Bore, Head and Stroke Combinations of L24, L26 or L28 with different Rod length and Stroke changes.
8:1 - 12:1ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 4-6 weeks to make
Learn More$1,450.00 -
JE Forged Piston Set for Datsun L24-L28 Engines. Flat or Dish with Valve Pockets.
SKU: L24_L26_L28_JE-Pistons6 Cylinder JE Custom Forged Piston Set - Dish, Flat or Dome - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons are currently 7-8 Week lead time to make
Learn More$1,496.84 -
6 Cylinder JE Custom Forged Piston Set - Nissan VG30 / VG33
SKU: JE_Nissan_VGCustom6 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 5-6 weeks to make
Learn More$1,496.84 -
Bryan Taylor Latest Lotus Set like older order
SKU: BTaylor_Pistons6-21Duplicate Lotus Set 06-21 Learn More$1,613.83 -
Viljam Lappi Finland L26 Engine package
SKU: Viljam_Lappi_L26$1350 Set of 6 with Pins, Locs and JE ProSeal rings.
Learn More
JE Forged pistons (83.5mm) with rings and Pins ( wanted CR Is 12:1 please try to get as close as possible.... valves Are open in TDC 4mm)
$149 Adjustable Cam Sprocket
$228 New valves 42/35
$252 New Rocker arms
$109 New retainers for valves (chromolysteel
$199 Timing Gear Set Complite ( +with adjustable cam spocket i dont need standart spocket)
$179 New main bearings to Crankshaft and connection rods (standart size)
$129 New FULL engine gasket kit
$339 Exhaust Header (1.5dia) 100% USA Made 14ga steel.
----------
$2934 USD + Shipping to be determined when packed.
-$749 USD ( Amount of customs docs to be paid separately )
---------
$2185 USD$2,185.00 -
Longlom Thailand 3TC Pistons 09-24 3 Sets
SKU: Longlom_L28_ThailandLearn More89mm Set is no problem...That is a Wiseco Catalog part..+ Shipping to be sorted out when ready to go...
89.5 is Not a Catalog part and has to be done as a Custom Set.
89mm is $759 Per Set as previously quoted
89.5mm is $795 per Set as a Custom part.$2,313.00
