S14

We aim about 320hp / 8800 rpm.
Asymmetric FSR Forging which will give us the best weight to strength ratio...
Gapless Top Rings
Undercrown Milling, Double Pin Oilers, Skirt Coating, Contact Reduction and Accumulator Grooves

Deposit Only to get Pistons and Rods underway with the balance and shipping when ready to ship.
$875     JE 9.8:1 x 87mm Piston Set
$1250   Pauter Lightweight 4340 Con Rod Set with ARP2000 Bolts
$139     Big Bore Head Gasket
$128     Rod and Main Bearings
$154     ARP Head Studs
$160     44 x 35 Performance Valves
$179     Turbo Oil Pump
Other items to be considered and added as needed...
Re-Grind your camshaft.
Complete Timing Chain and Gear Set
Full Engine gasket and seal set
Valve Springs / Retainers

$1050     Piston set at 8.5 or 8.8:1 is ideal...8.0 is a bit low...
               I recommend you do Skirt Coating, Contact Reduction and Accumulator grooves...
               See below for options and other pieces...
$699       Forged 4340 133mm Rods with ARP2000 Bolts.

$169       ARP head Studs 
$179       Cometic 87mm Bore 1.2mm Head gasket
$119       Turbo oil Pump

8 x INCONEL Exhaust
8 x SS Intakes
16 x Guides
32 x Keepers
1 x Complete Spring and Ti retainer set

$1250

$995 JE Forged Piston set with Pins, Locs and Rings
$179 Regrind your Camshaft
$169 ARP Head studs
$64 ARP Rod Bolts
$12 Freeze Plug Set
$129 Rod and Main Bearing set Std or .25
$229 Dual Spring Set with Moly Retainers
$250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM
$109 12 Piece Lash Pads kit to suit cam grind
-----------
$2136 + Shipping

$995 JE Forged Piston set with Pins, Locs and Rings
$179 Regrind your Camshaft
$169 ARP Head studs
$64 ARP Rod Bolts
$12 Freeze Plug Set
$129 Rod and Main Bearing set Std or .25
$229 Dual Spring Set with Moly Retainers
$250 12 Pieces OEM Nissan Rockers. NOT the Chines Crap being sold online that pop off above 5500 RPM
$109 12 Piece Lash Pads kit to suit cam grind
-----------
$2136 + Shipping

Custom L24 Flat Top Piston Set complete per your Spec sheet sent via email...

4 Cylinder JE Custom Forged Piston Set -

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

Subaru EJ205 96mm x 79mm x 8.5

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations