M42 , M44
-
Conny Lindroos Custom JE Re-Order
SKU: JE_Custom_ConnyJE Custom Forged Piston Set - All Dome Top - SHIPPING WILL BE CHARGED AFTER PACKED AND WEIGHED
9 pistons,
bore 3,209
Comp height 1,413.
Forign 81M.
Pin dia .905
pin length 2,250. JE ,073 wire locks. (HD pin)
The pistons should also be Flat Top.
Same Valve Pockets and noches as this older job.
With JE Pro Seal Rings
$1671.80 + $207 For Tuff Skirt Coating ( Was on last job )My address is:
Learn More
Conny Lindroos
Heinäkuja 1
21380 Aura Finland
+358 400828519$1,878.80 -
Nils S14B20 JE Pistons and Thick MLS Head Gasket
SKU: Nils_S14B20Then we'll go for this;94mm bore and 11.8 comp.72.6mm stroke and 149.7mm rods.He also wants one of those thick MLS gaskets to come with it.Learn More
$935 + $195 + Shipping$1,130.00 -
Jan Erik Fostad Cosworth Pistons, Rods and Shipping to Norway
SKU: Jan_Erik_FostadPiston set $795 Pistons, Pins, Locs and Rings....
Learn More
Bore Change to 90.8mm, Valve pocket change....
Pauter Rod Set $987 with ARP2000 Bolts.
$109 FedEx Shipping
* 90.8mm instead of 91.6mm ?
* Same Pin Height for use with same stroke and rod length
* Valve Pockets same diameter and location just not quite as deep
* Same Crown and compression ratio as old job$1,891.00 -
BMW S14B23 and B25 Custom JE Pistons.
SKU: s14_Custom_JEBMW S14B23 and S14B25 Custom JE Forged Piston Set.
4 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 4-6 weeks to make + Shipping time
Learn More$995.00 -
4 Cylinder JE Custom Forged Piston Set - All Flat, Dish or Dome Top - with or without valve pockets
SKU: je-custom-4-dish4 Cylinder JE Custom Forged 2618 or 4032 Piston Set - All Dish Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$835.00 -
4 Cylinder JE Custom Forged Piston Set for Alfa Romeo Dome with Valve Pockets
SKU: JE_Custom_ALFA4 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$895.00 -
Bailey Rover 620 ti 2l turbo t16 t series
SKU: Bailey_Rover4 Cylinder JE Custom Forged Piston Set - Remake from 2006 Job for 500HP and NOS
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$860.70 -
BMW M42/M44 Turbo and Normally Aspirated JE Forged Piston Set 8:1 to 11.5:1
SKU: M42_M44_Turbo_JE4 Cylinder M42 / M44 JE Custom Forged Piston Set - All Compression Ratios
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 8-10 weeks
Learn More$883.50 -
BMW M43 Custom JE Forged Pistons. 8.0:1 - 10.5:1 Dished or Flat.
SKU: JE_Custom_M434 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$895.00 -
1NZ-FE JE Custom Forged High Compression Piston Set - All Dome Top - with valve pockets
SKU: JE_Custom_1NZFE4 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$855.00 -
4 Cylinder JE Custom Forged Piston Set - Per Customer Specs for VW FSI Race Project
SKU: Custom_TSI_KeithThe engine we are building is VW for a formula open wheel class , the cyl head is a N/A FSI head converted from DI to port- manifold injection .
The specs are
Chamber volume 45 cc
Head gasket thickness .068
Head gasket bore diam 3.286
Intake valve head size 1.330 x2
Exhaust valve head size 1.102 x2
Conrods 6.259
Cylinder bore 3.270
Stroke 3.653
Pistons 2 RING
Piston pin 21 mmComp 15-1
Learn More$984.96 -
Logan Klenner Mits JE Customs and Pauter Rods
SKU: Logan_Klenner_4G93TPistons:
Basic set with all your Requested Options and Gapless Top Ring Set
$1209
With Buttons add $80 I would prefer buttons.. Add the buttons in J
So still the exact same price as the $2015 Quote… That’s pretty impressive that the price has remained the same so long!Rods
Learn More
$195 Per Rod. Thanks, Please put 8 of these on the order.
Bearings:
$60 Per Set of 4 rods to Drill them here…
ACL 4B8036H-STD Bearings are $53.20 per 4 Cyl Rod Set This is a pretty comparable price to what I would pay here so I think it would be best for me to included these in this order. Please include 2x drilled sets
-------------
$3075.40 US + Shipping TBD after packing.
$3,505.96 -
Ian Deering M10 Stroker Custom Parts.
SKU: Ian_Deering_M10Custom$935 JE 92mm bore 1.8i head x 10:1
$550 146mm Rods with ARP2000 Bolts.
**83mm S14 2.3 Crank**$165 +1mm SS Intake and Exhaust (47 x 39 ) Valves$189 Proper Street Dual Springs$369 NEW 304 Camshaft
$179 ARP Head Studs ( A MUST )$162 Cometic 92mm MLS Head Gasket$28 2 x 00 Pump Bleed ValvesLearn More
$22 4 x 155 Main Jets
$22 4 x 60F8 Idle Jets
$78 2 x 45 DCOE Repair Kits
----------
$2699$2,699.00
Peugeot XU10 4 Cylinder JE Custom Forged Piston Set - All Flat or Dish Top - with or without valve pockets
SKU: JE_Peugeot_XU10Peugeot XU10 4 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$849.30
4 Cylinder JE Custom Forged Piston Set Suzuki G13B SWIFT GTi
SKU: JE_Custom_Suzuki4 Cylinder JE 2618 Forged Custom Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$885.00
4 Cylinder JE Custom Forged Piston Set - Flat Top for customer to mill own dish up to 4mm deep.
SKU: Soren_CustomDish4 Cylinder JE Custom Forged Piston Set - All Flat Top -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$769.50
4 Cylinder JE Custom Forged Piston Set - All Flat or Dish Top - with or without valve pockets
SKU: je-custom-4-flat4 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations$835.00