Business Hours: Mon-Fri. 9:30am - 4:30pm Pacific Time Closed from 1:00-2:00 for Lunch. PHONE HOURS: 10:00am - 3:00pm Pacific Time M-F email us at topendmail@gmail.com Call us at 1 818 764-1901 ------------------------------------------------------
$1195 JE Piston Set Custom complete 85mm pistons with a 10.5:1 M52B28 Stroker $750 Molnar 135mm Rod Set with ARP2000 Bolts $245 ARP Head Studs $169 ARP Main Studs $214 Cometic MLS .070 x 85mm bore
6 Cylinder JE Custom Forged Piston Set - ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings Please note: ALL JE Custom Pistons take 6-8 weeks to make
Okay, here is all the info... The set of 6 Identical Replacement Pistons, pins, Locs and Rings is $1668.60 If you want the Upgraded Modern Ring Pack add $100
Shipping is $139 USD via FedEx... We can use that shipping amount as the value for customs so you have proof of payment...
Use this link to order and we will charge the shipping later when ready to go...
89mm Set is no problem...That is a Wiseco Catalog part.. 89.5 is Not a Catalog part and has to be done as a Custom Set. 89mm is $759 Per Set as previously quoted 89.5mm is $795 per Set as a Custom part.
6 Cylinder JE Custom Forged Piston Set - ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
> Large Tube 1.625" Race Header for High Compression 3.0+ $399
> 1. A set of DOMED JE pistons 88mmwith coating skirt and valve pockets. $1050 + $138 Skirt Coat depending on Dome, Dish, Flat, etc. That is a set of 6 Forged JE Pistons with Pins, Locs and JE Pro-Seal Rings.
> 2. A set of Conrod for using with LD28 crankshaft. No problem 133mm H-Beam Rods with ARP2000 Bolts $650
> 3. A set of racing valve largest possible 46mm inlet or larger. ! 46mm Intake and 38mm Exhaust $250 Set of 12
> 4. A set of valve spring with Matching Moly Steel Retainers. No Titanium $ 215 for the full set...
> 5. A set of valve guide ,silicone bronze if possible. $9.50 each = $114 ---------- $2816 $345 ---------- $3161 US
$279 ARP Head Studs Shipping will be sorted out when ready to go. Pistons are 7-8 weeks... We will sort out Low Value Customs Invoices when ready to ship.
84.5mm or 85mm bore change. 8.0-8.5:1 You specify and I will do.... 93 Series upgraded Pins for 1000 HP TuffSkirt Coating Contact Reduction and Accumulator Grooves..
Shipping to be sorted out when ready to ship....Estimated at $200 US 8 x Pistons, Pins, Locs and Rings will be $1257 US PH6600WUB8-A $691.37 for the Set.....
This will be a variation on one of our Catalog parts.... 6 Pistons with Pins, Locs and Rings. Includes Skirt Coat at no charge We will make to your requested Piston Diameter 86.365mm at gauge Point and Change to 10.8:1
$1416 + $110 ( Very close estimate ) FedEx Shipping.. 5-6 weeks like usual...( Could be faster )
Deposit $2100 -------------------- $269 FedEx Shipping $345 ARP S65 HSK $395 RACEWARE MSK $1695 V8 H-Beam ROD SET with ARP2000 Bolts. $2465 V8 JE PISTON SET $119 KING RACING BEARINGS $279 6 Top 1.2mm Rings Only ------------------- $3467 Due
M62 piston set CR 9.5:1 90mm final bore Lateral grooves Piston skirts coated Large valve relieves Stock stroke 82.7mm HD pins Max light weight, Supercharged boost design + Forged 4340 H-Beam Rods with ARP2000 Bolts.
