M10

4 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

4 Cylinder JE 2618 Forged Custom Piston Set - 

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

2 x Sets JE Pistons + 3 Sets of Rods.
1 x Remake of S14B25 Long Rod
1 x Remake 89.2mm M10
2 x BMW S14B23 144mm Con Rods
1 x BMW S14 149.7mm Con Rods with ARP 625 Custom Age Bolts

4 Cylinder JE Custom Forged Piston Set - All Flat Top -

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

4 Cylinder M42 / M44 JE Custom Forged Piston Set - All Compression Ratios

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 8-10 weeks

Compression height 1.686. That is to be 0.85mm higher so from 1.653 to 1.686. Currently the piston sits at 0.35mm below the deck and I’d like to have it 0.5mm above deck so and increase of 0.85mm in compression height. 
Piston dome volume 14cc. It was previously 23cc and I’d like to have that lowered to a total of 14cc. The 14cc should also include the negative displacement of the deeper valve pockets. 
14cc TOTAL Positive Volume Instead of 23ccInlet valve pocket to be 2.2mm deeper   
Exhaust valve pocket to be 2.6mm deeper  
New wire locks for pins  
Same options as in previous order and the piston to be same design 1:1 except the changes above so I can re-use the piston rings I already have setup for the bore as well as the piston pins. So I do not need the rings nor the pin.  

4 Cylinder JE Custom Forged Piston Set - Remake from 2006 Job for 500HP and NOS

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

4 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

4 Cylinder JE Custom Forged Piston Set -

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

4 Cylinder JE Custom Forged 2618 or 4032 Piston Set - All Dish Top - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

4 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings.
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

Peugeot XU10 4 Cylinder JE Custom Forged Piston Set - All Flat Top - with or without valve pockets

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

Pistons:
Basic set with all your Requested Options and Gapless Top Ring Set
$1209
With Buttons add $80   I would prefer buttons.. Add the buttons in J
So still the exact same price as the $2015 Quote… That’s pretty impressive that the price has remained the same so long!

Rods
$195 Per Rod. Thanks, Please put 8 of these on the order.

Bearings:
$60 Per Set of 4 rods to Drill them here…
ACL 4B8036H-STD Bearings are $53.20 per 4 Cyl Rod Set This is a pretty comparable price to what I would pay here so I think it would be best for me to included these in this order. Please include 2x drilled sets
-------------
$3075.40 US + Shipping TBD after packing.

4 Cylinder JE Custom Forged Piston Set - All Dish or Flat Top - with or without valve pockets

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

6 Cylinder JE Custom Forged Piston Set - High Compression Domed Pistons with Valve Pockets. SEE OTHER LISTINGS FOR DISHED OR FLAT TOP PISTONS.
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons have a lead time of 8-9 weeks

6 Cylinder JE Custom Forged Piston Set - All Flat or Dish Top - with or without valve pockets
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 7-8 weeks to make + 1 week for any coating operations

4 Cylinder JE Custom Forged Piston Set - 

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

ANY M10 JE Forged Piston Set...N/A or Turbo engine.
Any Bore or Compression Ratio ....Any Stroke or Rod Combo.
Any M10 / S14 Cylinder Head. E12, 121, 1.8i,  E21, 1600, S14

ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations...
4 Cyl JE Custom Forged BMW M10 Piston Set
Set of 4 JE Forged Pistons with Pins Locs and JE ProSeal Rings.
Any Bore or Compression Ratio and Crank / Rod Combination
SPECIFY BORE AND COMPRESSION RATIO AT CHECKOUT
89mm-96mm in .5mm incements
6.5:1 - 13.5:1 Ratios.

$695     Set of JE Forged Turbo Pistons 9.0:1 for Propane with 62cc Chamber and 89.5mm bore
+
$895     Set 144mm PAUTER Forged 4340 Con Rods with ARP2000 Bolts
Will use normal M10 Bearings
$109 for the set or Rods and Mains UnCoated
Add $65 for Coated Rod Bearings..
----------
$1764 US + Shipping + Other options and Add Ons. 

See below for other options, add On's etc. 
$155    Comeitc MLS Head Gasket .051-.070 thickness to compensate for milled head
$163    ARP Head Stud Set
$139    FULL Engine Gasket and Seal Set.

4 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

The engine we are building is VW for a formula open wheel class , the cyl head is a N/A FSI head converted from DI to port- manifold injection .
The specs are
Chamber volume  45 cc
Head gasket thickness .068
Head gasket bore diam 3.286
Intake valve head size    1.330   x2
Exhaust valve head size   1.102   x2
Conrods     6.259
Cylinder bore      3.270
Stroke   3.653
Pistons    2 RING
Piston pin 21 mmComp   15-1