BMW
BMW
We are the Premier JE Pistons BMW Distributor. We have the blueprints for all popular (and some not so popular) BMW engines in almost any Bore size, Compression ratio, Stroke, and Rod combination...If you call JE for BMW pistons chances are they will just refer you to us....
Upgrade to Total-Seal Gapless 2nd Rings on any set for $25.00 Per Cylinder or Total-Seal Gapless Top Rings for $38 per cylinder.
Options: Items with * are recommended for Turbo, NOS, and High RPM Normally aspirated Endurance Racing use.
All BMW pistons are made to order and order time is usually 3-4 weeks. We have many of the Euro piston blueprints as well as the US models...In some cases if it is a dome that we do not have a profile for we may require a sample to make them but we have been able to make 90+% of the requested pistons just from our extensive library of BMW Blueprints and Job #'s. We recommend Total-Seal Gapless rings on all BMW sets. Please see our BMW page for more BMW Performance information.
http://www.2002performance.com
-
Jacob M20 Turbo order...
SKU: Jacob_M20TurboLearn MoreSet of 6 JE Turbo M20 Pistons, Pins, Locs and ProSeal Rings $1395
4-6 weeks....The sooner you start these the better...The Holidays will cause a delay of almost 2 weeks...
New Turbo Specific Camshaft $399
Dual Turbo Valve Springs with Titanium Retainers $575
12 x HD Rocker Arms $375
Shipping will not be exact until packaged and weighed but will be right about $150 for this order....$2,894.00 -
6 Cylinder JE Custom Forged Piston Set -BMW S50 / S52 US and Euro Turbo. Flat Top or Dish Only. + $60 for Domed pistons
SKU: JE_BMW_S50-S52_Custom6 Cylinder JE Custom Forged Piston Set -
S50 / S52 US and Euro Turbo or N/A Flat Top or Dish Only.ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,496.84 -
BMW N54 Turbo 6 Cylinder JE Custom Forged Piston Set -
SKU: JE_N54CustomBMW N54B30 Custom Piston Set ...Any Bore or Compression Ratio
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,496.84 -
Ronny Bakken Re-Make M102 Turbo Pistons from 2006
SKU: Ronny_Bakken_M30Okay, here is all the info...
Learn More
The set of 6 Identical Replacement Pistons, pins, Locs and Rings is $1668.60
If you want the Upgraded Modern Ring Pack add $100
Shipping is $139 USD via FedEx... We can use that shipping amount as the value for customs so you have proof of payment...
Use this link to order and we will charge the shipping later when ready to go...$1,668.60 -
M20 High Compression M20 Piston Set Custom
SKU: JE_M20_HighCompression_CustomALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings:
Learn More$1,595.00 -
BMW M30 3.0 CSL Custom JE Piston Set
SKU: JE_M30_Custom6 Cylinder JE Custom Forged Piston Set - All Dome,with valve pockets
ALL JE Forged Piston Sets are Supplied complete with Wrist Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 5-6 weeks to make
Learn More$1,550.00 -
BMW E30 M20B25 Part Number JE - 63717-845, 85.00mm (1.00mm/.040” oversize) 9.7:1
SKU: M20_Spec_OZ_NZ_85mmBMW E30 M20B25 Part Number JE - 63717-850, 85.00mm (1.00mm/.040” oversize) 9.7:11
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Learn More$1,550.00 -
6 Cylinder JE Custom Forged Piston Set - BMW M54 Turbo or Supercharged
SKU: JE_M54_Custom_SC6 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,496.84 -
6 Cylinder JE Custom Forged Piston Set - M50, M52, M54 Normally Aspirated Piston Set.
SKU: JE_BMW_M54_ Custom6 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 10-12 weeks to make
Learn More$1,496.84 -
Peter Karvelas BMW S50 EURO Custom Set
SKU: Peter_Karvelas_S50EuroThis will be a variation on one of our Catalog parts....
6 Pistons with Pins, Locs and Rings.
Includes Skirt Coat at no charge
We will make to your requested Piston Diameter 86.365mm at gauge Point and Change to 10.8:1$1416 + $110 ( Very close estimate ) FedEx Shipping..
5-6 weeks like usual...( Could be faster )Learn More$1,384.72 -
ACURA NSX JE Forged Piston Set. Custom Made to order.
SKU: Acura_NSX_V66 Cylinder JE Custom Forged Piston Set -
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,496.84 -
Jukka Haapanen Custom JE Set + Molnar Rods
SKU: Jukka_HaapanenShipping to be sorted out when ready to ship....Estimated at $200 US
Learn More
8 x Pistons, Pins, Locs and Rings will be $1257 US
PH6600WUB8-A $691.37 for the Set.....$2,221.14 -
Steven Re-Make of 816897 for 1000 HP
SKU: Steven_816897Re-Make of 81689784.5mm or 85mm bore change.
8.0-8.5:1 You specify and I will do....
93 Series upgraded Pins for 1000 HP
TuffSkirt Coating
Contact Reduction and Accumulator Grooves..
Learn More$1,441.99 -
Michael M20B25 Road Race engine package.
SKU: Michael_OZ_M20$1095 1 x Custom JE PIston Set 10.0:1 84.5mm
$219 1x ARP Head studs
$170 1x ARP Main Studs
$162 1x Gasket set ( Full engine Gasket and Seal Set ? ) Full set
$218 1x Head Gasket ( Cometic MLS Head gasket is the correct choise with the ARP
$350 $175 x 2 2x Oil Pump ( You meant 2 Oil Pumps correct ? ) Yes correct
$98 1x Rocker Shafts Pair.
$229 1x Vernier Pulley ( Adjustable Cam Gear ? ) Yes
$59 1x Exhaust stud Nuts set + 1x Intake stud nuts set
$50 1x windage tray
-------
$2650 US+ Shipping of course...Needs to be boxed and weighed before we can get final cost...Likely in the $200 to low $200 range...
Learn More
Low Value Invoices for customs upon request...Below $1000 AUD with Freight...$3,021.00 -
Louis in Malta BMW M20B25 ARP and Cometic
SKU: Louis_Malta_ARPCometicCan you please send me the link for purchasing Cometic MLS Gasket 85mm x .060 $192 ARP Head Studs $228 ARP Main Studs $142 $89 FedEx shipping for my m20 BMW Learn More$742.14 -
Suhla M20B23 Stroker Piston Set
SKU: Suhla_M20JEPistonsM20B23 Stroker
80.35mm bore
Piston crown to be flat
Height of 36.3mm.
Wrist pin to be the same as for M20 engines. ( 22mm )
Pistons, Pins, Locs and Rings.
Learn More$1,340.09 -
Derin Sagun BMW M54B30 engine parts.
SKU: Derin_Sagun_M54B30M54B30
- $1150 Piston 8.8;1 84,5 mm core size
- $318 Piston options: Offset wrist pins Tuff coated skirts FSR forgings
- $699 Piston rod
- $279 ARP Head Studs
Shipping will be sorted out when ready to go.
Pistons are 7-8 weeks...
We will sort out Low Value Customs Invoices when ready to ship.
$2,788.44 -
Nic Cencic M20 Stroker Kit
SKU: Nic_Cencic_M20$1195 JE Piston Set Custom complete 85mm pistons with a 10.5:1 M52B28 Stroker
Learn More
$750 Molnar 135mm Rod Set with ARP2000 Bolts
$245 ARP Head Studs
$169 ARP Main Studs
$214 Cometic MLS .070 x 85mm bore$2,573.00 -
6 Cylinder JE Custom Forged Piston Set - BMW M54 ALL Variations
SKU: JE_M54_Custom6 Cylinder JE Custom Forged Piston Set - All Dome Top - with or without valve pockets
BMW M54ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 5 weeks to make + 1 week for any coating operations
Learn More$1,496.84 -
BMW M20 High Compression and Stroker Piston Set. OEM Crown to 10.5:1 or TEP Dome for 11:1+ CR
SKU: JE_M20_HighComp6 Cylinder JE Custom Forged Piston Set - All Dome Top
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 4-6 weeks to make + Shipping time
Learn More$1,550.00 -
6 Cylinder JE Custom Forged Piston Set - M50 / M52 / M54 Stroker N/A and Turbo
SKU: JE_BMW_M50_Stroker6 Cylinder JE Custom Forged Piston Set
Learn More
BMW M50, M52 and M54 and all Stroker Combinations.
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 4-5 weeks to make$1,475.00 -
BMW E30 M20B25 Part Number JE - 63717-845, 84.5mm (0.50mm/020” oversize) 9.7:1
SKU: Graeme_SpedM20_4SetsBMW E30 M20B25 Part Number JE - 63717-845, 84.5mm (0.50mm/020” oversize) 9.7:1
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Learn More$4,309.20 -
JE Custom Pistons for BMW S55 / N55 Turbo
SKU: BMW_S55_JEPistons6 Cylinder JE Custom Forged Piston Set -
BMW S55 and N55 Turbo Inline 6ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,495.00 -
BMW E30 M20B25 Part Number JE - 63717-845, 84.5mm (0.50mm/020” oversize) 9.7:1
SKU: M20_Spec_OZ_NZBMW E30 M20B25 Part Number JE - 63717-845, 84.5mm (0.50mm/020” oversize) 9.7:1
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Learn More$1,595.00 -
BMW M20 OEM 885 Head Piston Crown Set SPEC Class 9.3:1 Any Bore
SKU: M20_OEMCrown_CustomBMW M20 OEM 885 Head Piston Crown Set
ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings
Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations
Learn More$1,595.00