CP Pistons
 |
 |
Top-End Performance is an AUTHORIZED WAREHOUSE DISTRIBUTOR For CP Pistons.
 |
 |
 |
 |
 |
 |
 |
 |
Other Lines we offer that will likely be needed for your Engine Project...
Hello and Welcome to our CP/Carrillo Piston and Rod pages....
is an Authorized CP/CARRILLO Distributor.
You should be able to find all the CP Catalog and Shelf Stock pistons by selecting the make from the list of logos below..If you need more info or are not finding what you need you can refer the Catalog links and enter the part # into the Search this Section Field...We have every CP Carrillo part # in our system for you to shop and purchase...
CP Pistons and Carrillo Rods Automotive Catalog
CP Pistons Motorcycle and Powersports Catalog
-
6 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
SKU: cp-custom-6-dish6 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$1,027.50 -
6 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: cp-custom-6-flat6 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$997.50 -
4 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
SKU: cp-custom-4-dish4 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$685.00 -
4 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
SKU: cp-custom-4-dome4 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$695.00 -
-
6 Cylinder CP Custom Forged Piston Set -BMW M20B25 Stroker for Fadel
SKU: cp-custom-6-domeCP 86mm x 11.5:1 x 89.6mm Stroker Piston Set with Pins, Locs, Rings and Oil Ring Support Rails.Learn More
$1495 US
+ Shipping
+ Options like Coatings, Etc.$1,495.00 -
Mercedes M113K CP Piston and Carrillo Rod Set
SKU: CP_M113K_KitA full set of 8 x M113K CP Pistons and 8 x HD Carrillo Rods and WMC Bolts for your M113K Project.Learn More
For use in Sleeved Block. 97mm Std or 98mm +1mm bores...
X Forgings, Offset Pins, CP Forced induction Rings, Tool Steel Pins, Accumulator and Contact Reduction Grooves + Ceramic Crown Coat + Tuff Skirt Coat.
Note: This is a full featured upgraded Piston set for extreme boost and HP applications and not a base model piston and rod set..
If keeping ALUSIL Bores see add on option below.$5,795.00 -
BMW N54 Custom CP Piston Set
SKU: CP_Custom_N54Turbo6 Cylinder CP Custom Forged Piston Set -
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP Ring Set.
Please note: ALL CP Custom Pistons take approx 4 weeks to make + 1 week for any coating operations$1,050.00 -
-
Tony in Singapore N20B20 Project
SKU: Tony_N20_SingaporeN20B20 pistons Std Bore x 10.0:1 your cost $735 with PVD Coated Rings
Rods are in stock, N20 rods:
With CARR bolts $1250
$92 ShippingInvoice for whatever amount you want for Customs...
Learn More$2,077.00 -
Gytis LITHUANIA Custom Cosworth YB with 91.32mm bore change
SKU: Gytis_Finland_CosworthYBCustom made piston set for Coswroth YB engine which is used in rallycross supercar.
Learn More
We are already using CP product.
Now pistons size we have is 90.80mm.
We made a service for block and cylinder bore changed and it is 91.32mm.
We need service pistons for new block.
Serial number of the piston set we have is 223661. We need exactly same
4 piston set but bigger size. As i mentioned bore size is 91.32mm.
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$820.00 -
VQ35DET - Juha-Matti Riikonen
SKU: Juha-Matti RiikonenLearn MoreBlock Girdle is $192
Head Studs $199
Main Studs $185
Carrillos $1532.70
CP pistons $979 US
Total $3087.70$3,087.70 -
Josh King BMW M50 CP Carrillo and other parts
SKU: JoshKing_M50Standard size main and big end king racing bearings 86mm Athena cut ring head gasket The one cp piston with just one set of rings my others are fine. Supertech valves inlet and exhaust single grove but iconel exhaust plus the 80/84lb double sprung springs with single groove collets and titanium retainers. $298 King RACE Rod and Main Bearing $249 Athena Cooper Ring Gasket $655 Supertech inconel exhaust and black inlets ( Std or +1mm ) + $85 Single Groove Keepers.$85 Set of 48 pieces $689 Double sprung supertech valves with retainers 80# $19.60 Supertech valve stem seals $299.85 Single piston with a pin, locks, pin fit and one cylinder of rings ----------- $2295.45 US + Shipping to be sorted when Boxed and Weighed. Learn More$2,295.45 -
CP Custom SUBARU BRZ / FRS Piston Set
SKU: CP_BRZ_CustomSubaru BRZ
Learn More
all grade B cylinder , 86mm standard bore
"12:1" compression ratio
with Moly sideskirt coating
otherwise same as CP's OTS piston$869.00 -
12 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
SKU: cp-custom-12-dome12 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$2,085.00 -
10 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
SKU: cp-custom-10-dome10 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$1,737.50 -
10 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: cp-custom-10-flat10 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$1,662.50 -
12 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
SKU: cp-custom-12-dish12 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$2,055.00 -
12 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: cp-custom-12-flat12 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$1,995.00 -
5 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: cp-custom-5-flat5 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$831.25 -
5 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
SKU: cp-custom-5-dish5 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$856.25 -
8 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
SKU: cp-custom-8-flat8 Cylinder CP Custom Forged Piston Set - All Flat Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$1,330.00 -
8 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
SKU: cp-custom-8-dome8 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$1,390.00 -
8 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
SKU: cp-custom-8-dish8 Cylinder CP Custom Forged Piston Set - All Dish Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$1,370.00 -
5 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
SKU: cp-custom-5-dome5 Cylinder CP Custom Forged Piston Set - All Dome Top - with or without valve pockets
Learn More
ALL CP Forged Piston Sets are Supplied complete with Pins Locs and CP ProSeal Rings.
Please note: ALL CP Custom Pistons take 4 weeks to make + 1 week for any coating operations$868.75