Business Hours: Mon-Fri. 9:30am - 4:30pm Pacific Time Closed from 1:00-2:00 for Lunch. PHONE HOURS: 10:00am - 3:00pm Pacific Time M-F email us at topendmail@gmail.com Call us at 1 818 764-1901 ------------------------------------------------------
Elite 1000/1500 Mitsubishi 4G63 Terminated Harness Only WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included) Suits 1G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors. Includes Engine Harness with Fuse block kit and pre-wired HPI4 15AMP 4CH Ignition Module C.O.P. Ignition Harness. (Ignition module is NOT included. Please order HT-020032 if required) Learn More
Elite 1000/1500 Mitsubishi 4G63 Terminated Harness Only WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included) Suits 2G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors. Includes Engine Harness with Fuse block kit and pre-wired HPI4 15AMP 4CH Ignition Module C.O.P. Ignition Harness. (Ignition module is NOT included. Please order HT-020032 if required) Learn More
Elite 1000/1500 Mitsubishi 4G63 Terminated Harness Only WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included) Suits 1G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors. Includes Engine Harness with Fuse block kit and pre-wired Power Select 4 CDI - Dual Power Output 115mJ/150mJ CDI C.O.P. Ignition Harness. (CDI unit is NOT included. Please order HT-020203 if required) Learn More
Elite 2000/2500 Toyota 2JZ Terminated Harness Only Suits both VVT-i and non VVT-i engines If your engine is fitted with the factory electronic ETCS-i throttle body it will require a "Throttle Convert Kit" or conversion to a cable operated mechanical throttle body WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included) Suits Bosch EV1 injector connectors - Includes Engine Harness, & Fuse Block Kit. Includes pre-wired High Output IGN-1A Inductive Coil (with built-in Ignitor) Ignition Harness (IGN-1A coils are NOT included. Please order 6 x HT-020114 if required) Learn More
Elite 1000/1500 Mitsubishi 4G63 Terminated Harness Only WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included) Suits 2G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors. Includes Engine Harness with Fuse block kit and pre-wired Power Select 4 CDI - Dual Power Output 115mJ/150mJ CDI C.O.P. Ignition Harness. (CDI unit is NOT included. Please order HT-020203 if required) Learn More
Elite 2000/2500 Toyota 2JZ Terminated Harness Only Suits both VVT-i and non VVT-i engines If your engine is fitted with the factory electronic ETCS-i throttle body it will require a "Throttle Convert Kit" or conversion to a cable operated mechanical throttle body WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included) Suits Bosch EV1 injector connectors - Includes Engine Harness, & Fuse Block Kit. Includes pre-wired HPI6 15AMP 6CH Ignition Module to factory coil ignition harness. (Ignition module is NOT included. Please order HT-020036 if required) Learn More
Elite 2000/2500 Toyota 2JZ Terminated Harness Only Suits both VVT-i and non VVT-i engines If your engine is fitted with the factory electronic ETCS-i throttle body it will require a "Throttle Convert Kit" or conversion to a cable operated mechanical throttle body WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included) Suits Bosch EV1 injector connectors - Includes Engine Harness, & Fuse Block Kit. Includes pre-wired Dual Power Output 115mJ/150mJ Power Select 6 CDI to factory coil ignition harness. (CDI module is NOT included. Please order HT-020207 if required) Learn More
Elite 2500 & Race Expansion Module (REM) 16 Sequential Injector V8 Big Block/Small Block GM, Ford & Chrysler Hemi Terminated Harness Only - Suits Bosch EV1 injector connectors - Includes Engine Harness, 160A SSR & Promag Ready Ignition Harness (8 individual ignition coil ready when used with HT-130306, HT-130311, HT-130312 or HT-130313) Learn More
Elite 1000 Mitsubishi 4G63 Terminated Harness ECU Kit
WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included)
Suits 1G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors.
Includes ECU, Engine Harness with Fuse block kit and Flying lead ignition harness. Learn More
Elite 1000 Mitsubishi 4G63 Terminated Harness ECU Kit
WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included)
Suits 2G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors.
Includes ECU, Engine Harness with Fuse block kit and Flying lead ignition harness. Learn More
Elite 2000 GM GEN III LS1 & LS6 non DBW Terminated Harness ECU Kit WBC1/2 CAN O2 Wideband Controller ready (Controller and sensor(s) not included) Suits factory EV1 injector connectors - Includes ECU, Engine Harness, & Fuse Block Kit. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector (Ignition coils and harnesses are NOT included, Please order 8 x HT-020102 and/or HT-045657 if required) Learn More
Elite 2000 GM GEN IV LSx (LS2/LS3 etc) non DBW Terminated Harness ECU Kit WBC1/2 CAN O2 Wideband Controller ready (Controller and sensor(s) not included) Suits Bosch EV1 injector connectors - Includes ECU, Engine Harness, & Fuse Block Kit. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector (Ignition coils and harnesses are NOT included) Learn More
Elite 2000 GM GEN IV LSx (LS2/LS3 etc) non DBW Terminated Harness ECU Kit WBC1/2 CAN O2 Wideband Controller ready (Controller and sensor(s) not included) Suits factory EV6 injector connectors - Includes ECU, Engine Harness, & Fuse Block Kit. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector (Ignition coils and harnesses are NOT included) Learn More
Elite 2000 Nissan RB30 Single Cam Fully Terminated Harness ECU Kit WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included) Suits Bosch EV1 injector connectors - Includes ECU, Engine Harness, & Fuse Block Kit. Pre-wired to connect directly to the supplied LS1 ignition coil with billet mounting bracket. Includes air & coolant temp sensors and Bosch knock sensor. (Can be reconfigured to run 6 indiviudal ignition coils using HT-045504 if required) Learn More
Elite 1000 Mitsubishi 4G63 Terminated Harness ECU Kit
WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included)
Suits 1G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors.
Includes ECU, Engine Harness with Fuse block kit and pre-wired Power Select 4 CDI - Dual Power Output 115mJ/150mJ CDI and C.O.P Ignition Harness. Learn More
Elite 1000 Mitsubishi 4G63 Terminated Harness ECU Kit
WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included)
Suits 2G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors.
Includes ECU, Engine Harness with Fuse block kit and pre-wired Power Select 4 CDI - Dual Power Output 115mJ/150mJ CDI and C.O.P Ignition Harness. Learn More
Elite 2500 T with ADVANCED TORQUE MANAGEMENT & RACE FUNCTIONS - Ford Coyote 5.0 Terminated Harness ECU Kit - WBC1/2 CAN O2 Wideband Controller ready (Controller and sensor(s) not included) Suits EV1 injector connectors & Early Style Cam Solenoid - Small single offset keyed connector Supports DBW and Quad Cam Timing, kit includes HPI8 15amp high power ignition module *Requires modification for fitment to supercharged Cobra Jet version. Learn More
Elite 2500 T with ADVANCED TORQUE MANAGEMENT & RACE FUNCTIONS - Ford Coyote 5.0 Terminated Harness ECU Kit - WBC1/2 CAN O2 Wideband Controller ready (Controller and sensor(s) not included) Suits factory injector connectors & Early Style Cam Solenoid - Small single offset keyed connector Supports DBW and Quad Cam Timing, kit includes HPI8 15amp high power ignition module *Requires modification for fitment to supercharged Cobra Jet version. Learn More
Elite 2500 T with ADVANCED TORQUE MANAGEMENT & RACE FUNCTIONS - Ford Coyote 5.0 Terminated Harness ECU Kit - WBC1/2 CAN O2 Wideband Controller ready (Controller and sensor(s) not included) Suits EV1 injector connectors & Late Style (Late 2013 onwards) Cam Solenoid - Large 4 keyed Bosch connector Supports DBW and Quad Cam Timing, kit includes HPI8 15amp high power ignition module *Requires modification for fitment to supercharged Cobra Jet version. Learn More
