Terminated Engine Harnesses

8 Channel Individual High Output IGN-1A Inductive Coil Harness Only - Suits Big Block/Small Block GM/Chrysler Hemi V8 - Direct Plug In to Haltech V8 Terminated Harness, Elite + REM 16 Injector Terminated Harness, & Elite + REM Fully Integrated Flying Lead Harness. Includes High Current 75A TE Power Relay (Ignition coils are NOT included. Please order 8 x HT-020114 if required) Learn More

8 Channel Individual High Output IGN-1A Inductive Coil Harness Only - Suits Big Block/Small Block Ford V8 - Direct Plug In to Haltech V8 Terminated Harness, Elite + REM 16 Injector Terminated Harness, & Elite + REM Fully Integrated Flying Lead Harness. Includes High Current 75A TE Power Relay (Ignition coils are NOT included. Please order 8 x HT-020114 if required) Learn More

Elite 950 V8 Big Block/Small Block GM, Ford & Chrysler Terminated Harness Only - Suits Bosch EV1 injector connectors - Includes Engine Harness, Distributor/MSD Ready Ignition Harness & Three Circuit Fuse Block. Learn More

Elite 950 GM GEN III LS1 & LS6 non DBW Terminated Harness Only Suits: Factory EV1 injector connectors and common US style Delco/Bosch GM alternator connector. Includes: Engine Harness, & Three Circuit Fuse Block. Notes: Please confirm your alternator connector (further information available in the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040090) Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector (Ignition coils and harnesses are NOT included, Please order 8 x HT-020102 and/or HT-045657 if required) E950 ECU Does not support the factory GM idle speed stepper motor control. Learn More

Elite 950 GM GEN IV LS2 & LS3 non DBW Terminated Harness Only Suits: Bosch EV1 injector connectors and common US style Delco/Bosch GM alternator connector. Includes: Engine Harness, & Three Circuit Fuse Block. Notes: Please confirm your alternator connector (further information available in the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040090) Notes: Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector (LS2 Ignition coils and harnesses are NOT included) E950 ECU Does not support the factory GM idle speed stepper motor control. Learn More

PS1000 Mazda 13B Terminated Harness Only Includes flying lead ignition harness. Suits Square Bosch EV1 injector connectors Learn More

PS1000 Mazda 13B Terminated Harness Only Includes pre-wired HPI4 15AMP 4CH Ignition module harness. Suits Square Bosch EV1 injector connectors (Ignition module & coils are NOT included. Please order HT-020032 & 4 x HT-020110 if required) Learn More

PS2000 FORD 89-95 5.0 Terminated Full Sequential Harness Only Suits Square Bosch EV1 injector connectors - Includes Engine Harness, & Fuse Block. Full Sequential Injection Pre-wired to connect directly to OEM TFI Module, Includes breakouts for Distributor or Crank Sensor Trigger (Use with OEM TFI Ignition or CDI MSD6, MSD7, Crane, Mallory, etc) Learn More

PS2000 Nissan RB30 Single Cam Terminated Harness Only Suits Square Bosch EV1 injector connectors. Includes Engine Harness, & Fuse Block. Pre-wired to connect directly to the supplied LS1 ignition coil with billet mounting bracket. Includes air & coolant temp sensors. (Can be reconfigured to run 6 individual ignition coils using HT-045604) Learn More

PS2000 GM GEN III LS1 & LS6 Non DBW Terminated Harness Only Suits Square Bosch EV1 injector connectors. Includes Engine Harness, & Fuse Block Kit. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. (LS1 ignition coils and Harnesses are NOT included) Learn More

PS2000 GM GEN IV LS2 & LS3 Non DBW Terminated Harness Only * Requires retrofit of cable operated throttle body Suits Square Bosch EV1 injector connectors. Includes Engine Harness & Fuse Block Kit. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. (Ignition coils and harnesses are NOT included) Learn More

PS2000 GM GEN IV LS2 & LS3 Non DBW Terminated Harness Only * Requires retrofit of cable operated throttle body Suits factory EV6 injector connectors. Includes Engine Harness & Fuse Block Kit. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. (Ignition coils and harnesses are NOT included) Learn More

PS1000 Mazda 13B Terminated Harness Only Includes pre-wired LS1 ignition coil harness. Suits Square Bosch EV1 injector connectors (LS1 ignition coils are NOT included. Please order 4 x HT-020102 if required) Learn More

PS2000 Toyota 2JZ Terminated Harness Only Includes pre-wired HPI6 15AMP 6CH Ignition Module to factory coil ignition harness. Suits Square Bosch EV1 injector connectors. (Ignition module is NOT included. Please order HT-020036 if required) Learn More

PS2000 Toyota 2JZ Terminated Harness Only Suits Square Bosch EV1 injector connectors. Includes pre-wired M&W Pro-16b 6-wire CDI to factory coil ignition harness. (CDI module is NOT included. Please order HT-020256 if required) Learn More

Elite 2500/2500 T V8 Big Block/Small Block GM, Ford & Chrysler Terminated Harness Only - Suits Bosch EV1 injector connectors - Includes Engine Harness, Distributor/MSD Ready Ignition Harness & Haltech Fuse Block. (8 individual ignition coil ready when used with HT-130306, HT-130311, HT-130312 or HT-130313) Learn More

8 Channel Individual High Output IGN-1A Inductive Coil & Harness Kit - Suits Big Block/Small Block GM/Chrysler Hemi V8 - Direct Plug In to Haltech V8 Terminated Harness, Elite + REM 16 Injector Terminated Harness, & Elite + REM Fully Integrated Flying Lead Harness. Kit Includes High Current 75A TE Power Relay & 8 x HT-020114 Ignition coils Learn More

8 Channel Individual High Output IGN-1A Inductive Coil & Harness Kit - Suits Big Block/Small Block Ford V8 - Direct Plug In to Haltech V8 Terminated Harness, Elite + REM 16 Injector Terminated Harness, & Elite + REM Fully Integrated Flying Lead Harness. Kit Includes High Current 75A TE Power Relay & 8 x HT-020114 Ignition coils Learn More

Elite 1000/1500 Mitsubishi 4G63 Terminated Harness Only WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included) Suits 1G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors. Includes Engine Harness with Fuse block kit and Flying lead ignition harness. Learn More

Elite 1000/1500 Mitsubishi 4G63 Terminated Harness Only WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included) Suits 2G CAS (Cam Angle Sensor) and Square Bosch EV1 injector connectors. Includes Engine Harness with Fuse block kit and Flying lead ignition harness. Learn More

Elite 2500 GM GEN III LS1 & LS6 non DBW Terminated Harness Only Learn More

Elite 2500 GM GEN III LS1 & LS6 (GEN IV LS2/3 DBW Retrofit Ready) Terminated Harness Learn More

Elite 2500 GM GEN IV LSx (LS2/LS3 etc) non DBW Terminated Harness Only Learn More

Elite 2500 GM GEN IV LSx (LS2/LS3 etc) non DBW Terminated Harness Only Learn More