Domestic Shipping: Calculated after checkout based on your location.
International Shipping: Calculated after checkout based on your location.
Product Description
- You must Solder these on to insure a proper connection.
DO NOT USE CRIMP CONNECTORS ! - Always clean the contacts on the injector itself with a small file or piece of abrasive paper / cloth to get a good connection with the new connector. This is critical and failure to clean the injector can cause a worse connection than before replacement.
- You must Solder these on to insure a proper connection.
DO NOT USE CRIMP CONNECTORS ! - Always clean the contacts on the injector itself with a small file or piece of abrasive paper / cloth to get a good connection with the new connector. This is critical and failure to clean the injector can cause a worse connection than before replacement.
Details
Fuel Injector replacement connectors. $25 for the PAIR for Starion Conquest.
Fits stock injectors on Starion, Z car, BMW, Toyota, Etc. Bosch, Nippondenso, Siemens, Lucas injectors. Square plug only. Will not fit the Round or Oval plugs found on many Toyota and Mazda vehicles.
These little pieces cause more problems that anyone can imagine. A bad or corroded connection at the injector will cause mis-firing, poor acceleration, and occasionally the car will not even start.
Our connectors use the quick release style clip so that you do not have to pick the little "U" shaped clip out to remove them. Connectors comes with about 6" of wire so that you can cut yours back to a good clean place in the wire before soldering these on.
$12.50 each
$60 for sets of 6
$89 for sets of 8
Tips and Tricks:
Additional Information
Additional Information
Alert Text | No |
---|---|
Weight | 1.0000 |
Width | No |
Height | No |
Depth | No |
Length | No |
Automotive type | No |
Part Type | No |