Search results for 'm20'

6 Cylinder JE Custom Forged Piston Set - All Dome,with valve pockets
M20B25 and strokers

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

BMW M20 OEM 885 Head Piston Crown Set

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 3 weeks to make + 1 week for any coating operations

6 Cylinder JE Custom Forged Piston Set - M20 High Compression or Turbo

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 6-8 weeks to make

6 Cylinder JE Custom Forged Piston Set - M20 OEM Crown with Stroker  or Long / Short Rods

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 8-9 weeks to make at this time

6 Cylinder JE Custom Forged Piston Set - M20 TURBO APPLICATIONS

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 6-8 weeks to produce

BMW M20B25 6 Cylinder JE Custom Forged Piston Set - 84.5mm x 9.3:1

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

M20B25 Strokers using OEM Offset Dome / Dish Crown Style. 

We can make proper 885 head style pistons 84.5 x 11:1
$1395 set of 6 with Pins, Locs and Rings...6-7 week order time...
6 x 84.5mm pistons 11:1 compression  81mm 2.7 stroke x 130mm Rods.
Block height after .003 deck = 8.108 / 2.059 which is Perfect    Head cc = 40cc
$78     Rod bearing set Standard
$139   main bearing set Standard
$157   ARP hardware for mains
$189   ARP hardware for Stock Rods
$24.26    6x 42mm intake valves. Later
$21.74  6x 36mm exhaust valves Later
$550   valve springs with retainers/keepers.12 x Dual Performance Springs + Titanium Retainer set. Direct replacement.
$00     valve seats  MACHINIST SUPPLIES SEATS
$24     Set of 12 Valve Stem seals,
$102   Set of 12 valve guides.
$35      each  x 12 rocker arms with new eccentrics. Hardened.
$253    ARP head studs or bolts
$395   NEW 284 cam for 885 head

BMW E30 M20B25 Part Number JE - 63717-845, 84.5mm (0.50mm/020” oversize) 9.7:1

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

BMW E30 M20B25 Part Number JE - 63717-845, 84.5mm (0.50mm/020” oversize) 9.7:1

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

6 Cylinder JE Custom Forged Piston Set - All Dome Top

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

Please note: ALL JE Custom Pistons take 4-6 weeks to make + Shipping time

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings: 

BMW E30 M20B25 Part Number JE - 63717-850, 85.00mm (1.00mm/.040” oversize) 9.7:11

ALL JE Forged Piston Sets are Supplied complete with Pins Locs and JE ProSeal Rings

$1095 1 x Custom JE PIston Set 10.0:1 84.5mm  
$219   1x ARP Head studs
$170   1x ARP Main Studs
$162   1x Gasket set ( Full engine Gasket and Seal Set ? )   Full set
$218   1x Head Gasket ( Cometic MLS Head gasket is the correct choise with the ARP 
$350   $175 x 2  2x Oil Pump ( You meant 2 Oil Pumps correct ? )  Yes correct
$98     1x Rocker Shafts Pair.
$229   1x Vernier Pulley ( Adjustable Cam Gear ? ) Yes
$59     1x Exhaust stud  Nuts set + 1x Intake stud nuts set
$50     1x windage tray
-------
$2650 US

+ Shipping of course...Needs to be boxed and weighed before we can get final cost...Likely in the $200 to low $200 range...
Low Value Invoices for customs upon request...Below $1000 AUD with Freight...

M20B23 Stroker
80.35mm bore
Piston crown to be flat
Height of 36.3mm.
Wrist pin to be the same as for M20 engines. ( 22mm ) 
Pistons, Pins, Locs and Rings.

$1195  JE Piston Set Custom complete 85mm pistons with a 10.5:1 M52B28 Stroker
$750    Molnar 135mm Rod Set with ARP2000 Bolts
$245    ARP Head Studs
$169    ARP Main Studs
$214    Cometic MLS .070 x 85mm bore