Products
- Haltech Software Resource USB KEY - All Products
- Haltech Haltech Resource Manual - Introduction to EFI & Elite Series Introduction - ENGLISH
- Haltech Serial Cable 9 Pin 2m - suits E6, E8, E11 and Interceptor range of ECU's
- USB Connection Cable 2m
- USB Connection Cable 2m - Haltech Branded
- Pro Tuner Knock Ears Kit - Dual Channel 2014 Spec
- Knock Sensor Only - Suit 2014 Pro Tuner Knock Ears Kit
- Haltech USB Stingray 2CH SCOPE with 2 Probe Kits
- Haltech Single Replacement Probe kit - suit USB 2CH Scope
- Dual Crimper set - inc 3 pin removal tools
- Haltech Racepak ROM UPGRADE (Increases from 16 to 20 EFI Channels & 32 to 40 total loggablechannels) (EXCLUDING ALL FREIGHT- CHARGES)
- Haltech Elite or Platinum Series ECU Bench Test (EXCLUDING ALL FREIGHT CHARGES)
- Haltech F10X, E6X, E8 & E11v2 ECU Repairs
- Cam Follower 22.5mm x 16x 3.0mm .
- Cam Follower 24.5mm x16mm x3.0mm
- Cam Follower 24mmx17mm x 2.7mm
- Cam Follower 26mm x 18x 3.0mm .
- Cam Follower 28mm x 20mm x 3.0mm
- Cam Follower 28mm x 23 x 3.65+ Shimm 8mm diam.
- Cam Follower 30mm x 23.50 x 3.3mm
- Cam Follower 30mm x 26x 16mm
- Cam Follower, solid, 31 x 24.8 x 2.7mm
- Caam Follower 31 x 25.50mm 2.78mm (limited time only)
- Cam Follower, solid, 31 x 25.5 x 3.78 mm.
- Cam Follower 31mm x 25.5 x 2.5+ Shimm 8mm diam.
- Cam Follower 31mm x 25.5 x 3.28 + Use shimm 8mm diam. thickness 1.45 - 2.70mm.
- Cam Follower 31 x 25.5 x 4.20mm
- Cam Follower 31 x 25.5 x 4.80mm + Shim
- Cam Follower 32 x 24.50 x 3.10mm
- Cam Follower 32 x 24.50 x 3.25mm
- Cam Follower 32 x 24.50 x 3.55mm
- Cam Follower 32 x 24.50 x 3.70mm
- Cam Follower 32 x 26 x15mm
- Cam Follower, solid, 33x26x3.0mm
- Cam Follower, solid 33x24.5x5.10mm
- Cam Follower 34mm x 26 x 2.5+ Shimm 8mm diam.
- Cam Follower, solid, 35x26x2.8mm
- Cam Follower, solid, 35x26x3.3mm
- Cam Follower Solid 35x26x5.5mm
- Cam Follower, solid, 37x26x3.3mm
- Cam Follower, solid 37.5x28x3.1mm thick (+ 8mm shim)
- Cam Follower, solid 37.5x28x4.5mm thick
- Cam Follower, solid 37.5x28x5.65mm thick (+ 8mm shim)
- Cam Follower, Solid 38x 28 x 3.1mm must be used with 8mm shim
- 5mm Single groove valve lock conversion
- 5.5mm Valve Lock - 10 degrees /half
- 5.5mm Valve Lock - 7 degrees (2/valve). Standard.
- KPR-5.5/7A-LG
- 5.5mm Valve Lock - 7 degrees (2 halves / valve)
- 6.6mm Honda LS keeper 7 degree.