Products
- Nissan 350-VQ35 / diam 95.50(std) mm/ 4032 Forged piston/ 29.6mm Comp. height/ -10cc Dish /22mm pin offset/ Rings 1.2 x 3.45/ 1.2x4.10/ 2.5x2.75 mm./ CR 8.7:1/ Valve Pockets 1.5mm deeper than stock/ Use with rings SWN30131-0 (SET OF 6)
- Nissan 350Z Dual Valve Spring kit: 70 @ 36mm (24)SPR-TS1015 + (24)RET-TS5.5/T8 + SEAT-TS1015..
- Nissan 5.5mm valve stem seal / Viton - SET OF 12
- Nissan CA18DET Exhaust valve 29.15x5.95x89.30mm/ Inconel/ +1mm size/chrome coating
- Nissan CA18DET/ Diam 83.5mm (+0.5) Forged piston/ 4032/ 30mm(std) Comp. Height/ Flat Top / Deep valve pocket/ 20mm pin off center/ Rings 1x3.10, 1.2x3.5, 2.8x3.10mm / (8.5:1 CR)...
- Nissan CA18DET/ Diam 84.50mm (+1.5) Forged piston/ 4032/ 30mm(std) Comp. Height/ Flat Top / Deep valve pocket/ 20mm pin off center/ Rings 1x3.10, 1.2x3.5, 2.8x3.10mm / (8.5:1 CR).
- Nissan CA18DET/ Diam 84mm (+1) Forged piston/ 4032/ 30mm(std) Comp. Height/ Flat Top / Deep valve pocket/ 20mm pin off center/ Rings 1x3.10, 1.2x3.5, 2.8x3.10mm / (8.5:1 CR)...
- Nissan KA24 Intake and Exh. guide- 39.6mm x 6.98mm x 11.050 (+0.02)mm - Manganese Bronze
- Nissan KA24 Intake and Exh. guide- 39.6mm x 6.98mm x 11.050 (+0.02)mm - Manganese Bronze (SET OF 8)
- Nissan L28 Exhaust valve 35mm (std) x 7.95 x 117.35mm / Blk Nitrided/ Dish/ SS EV8(SET OF 4)
- Nissan Patrol TB48DE 4.8lts. I6 24v - Intake Valve 40.50(+2mm)x6.97x100.10mm / SS/ Blk. Nitrided/ Flat Face/ Undercut/ back-cut.
- Nissan Patrol TB48DE I6 24v Exhaust Valve 34.30 (+1mm)x6.95x98.30mm / Chrome coating/Flat Face/ undercut / Inconel
- Nissan Patrol TB48DE I6 24v Exhaust Valve 34.80 (+1.5mm)x6.95x98.30mm / Chrome coating/Flat Face / Inconel
- Nissan Patrol TB48DE I6 24v Exhaust Valve 34.80 (+1.5mm)x6.95x98.30mm / SS/ Blk. Nitrided/Flat Face/ undercut.( SET OF 12)
- Nissan Patrol TB48DE I6 24v Intake Valve 38.5(std)x6.97x100.10mm / SS/ Blk. Nitrided/ Undercut/ Back cut / Flat face
- Nissan Patrol TB48DE I6 24v Intake Valve 39.5(+1mm)x6.97x100.10mm / SS/ Blk. Nitrided/ Undercut/ Back cut / Flat face
- Nissan Patrol TB48DE I6 24v Intake Valve 40(+1.5mm)x6.97x100.10mm / SS/ Blk. Nitrided/ Flat Face/ Undercut/ 32 degree back-cut/swirl polish. (SET OF 12)
- Nissan RB20 2.0lts / diam 78.50 mm (+0.50)/ 4032 Forged piston/ 32mm Comp. height/ +1.3 cc Dome (std)/21mm pin/ Rings 1 x 3.10/ 1.2x3.40/ 2.8x3.10 mm./ CR 8.5:1.Tool steel wrist pin (set of 6)
- Nissan RB20 2.0lts / diam 79.00 mm (+1)/ 4032 Forged piston/ 32mm Comp. height/ +1.3 cc Dome (std)/21mm pin Off center/ Rings 1 x 3.10/ 1.2x3.40/ 2.8x3.10 mm./ CR 8.5:1(SET OF 6)
- Nissan RB25 2.5lts / diam 86.50 mm (+0.50)/ 4032 Forged piston/31.50mm Comp. height/ +15.5 cc Dome (std)/21mm pin/ Rings GNH 1 x3.10/ 1.2x3.50/ 2.8x3.10 mm./ CR 9:1.
- Nissan RB25/ RB26 Forged Connecting Rod/ 4340 alloy/ H beam/ ARP 2000 bolts/ C-C Length 121.5mm (4.783") / BE bore: 51.003mm (2.008")/ BE width: 21.8mm (0.858") / PE bore: 21mm full float/ PE width: 21.8mm (0.858"). ( SET OF 6)
- Nissan RB26 Exhaust Valve 30.15 (std) x6.94x101.60mm /Inconel/ SODIUM FILLED
- Nissan RB26 Exhaust Valve 30.15x6.94x102.7mm /Inconel / +1mm/ 1.5mm Longer Tip
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 2.75mm - (SET OF 12)
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 2.80mm - (SET OF 12)
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 2.85mm - (SET OF 12)
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 2.90mm -(SET OF 12)
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 3.125mm
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 3.175mm
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 3.225mm
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 3.275mm
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 3.325mm
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 3.375mm
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 3.425mm
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 3.475mm
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 3.525mm
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 3.575mm
- Nissan RB26 factory shim replacement Diam 12.15mm - thickness 3.85mm -
- Nissan RB26DET Intake Valve 34.65 (std) x 5.97 x 103.80mm / SS/ Blk. Nitrided/ / Tip 1.5mm longer
- Nissan RB26DET Intake Valve 36.15 (+1.5) x5.97x102.30mm / SS/ Blk. Nitrided.
- Nissan SR20 Dual Valve Spring Kit: 116lbs @ 40.5mm Installed Height / SPR-H1020D + RET-NSR20/T1 + (8)SEAT-SR20/6 For DET use (8)SEAT-H/N240 on Exhaust
- Nissan SR20D Exhaust Valve / INCONEL / 30.65x5.94x102.40mm / SS/ Chromed/ 0.5mm +
- Nissan SR20D Exhaust Valve 30.15x5.94x102.40mm / SS/ Blk. Nitrided/ stk.size.
- Nissan SR20D Exhaust Valve 31.15x5.94x102.40mm / SS/ Blk. Nitrided/ 1 mm +
- Nissan SR20DET/ VE - Diam 86.5mm (+0.5) Forged piston/ 4032/ 32mm(std) Comp. Height/ - 10cc dish / 22mm pin/ Rings 1, 1.2, 2.8mm.(9:1 CR).(SET OF 4)
- Nissan SR20DET/ VE - Diam 87mm (+1) Forged piston/ 4032/ 32mm(std) Comp. Height/ - 10cc dish(std -11.7cc) / 22mm pin/ Rings GNH 1, 1.2, 2.8mm.(9:1 CR).(SET OF 4)
- Nissan VG30 Dual Valve Spring kit: 84lbs @35mm / 225@ 11.8mm lift / (24) SPR-TS1015+ (24) RET-NVG1015/T1 + (24) SEAT-TS1015
- Nissan VQ30 Cam follower. Diam 35mm x 26mm height x 8mm post. To be used with 7mm Lash Caps inserted on the follower stem
- Nissan VR30DDTT Exhaust Racing valve 28.5(std) x 5.46 x 97.5mm / Tip 9.7mm/ Inconel alloy/ Sodium filled (12v of ea)
- Nissan VR30DETT 3.0lt V6 Conical Spring kit. 80lbs@37mm- 217 @10mm CB: 22.80mm Max net lift 12.70mm - SPR-FM46-BE2 (24) + RET-NVR55-T1 (24) + SS3025 (24)