Products
- BMW Mini 2.0L B48 - Exhaust valve 28.5 (std) x 5.95 x 100.1mm / Inconel / Dish/ Single groove / Solid Stem / Use with keeper KPR-6S/7
- BMW Mini 2.0L B48 - Exhaust valve 29.5 (+1) x 5.95 x 100.1mm / Inconel / Dish/ Single groove / Hollow Sodium Filled / Use with keeper KPR-6S/7
- BMW Mini 2.0L B48 - Exhaust valve 29.5 (+1) x 5.95 x 100.1mm / Inconel / Dish/ Single groove / Hollow Sodium Filled / Use with keeper KPR-6S/7(ST OF 8)
- BMW Mini 2.0L B48 - Intake valve 31.10 (+1) x 4.96 x 99.50mm / SS Black Nitride / Dish/ Single groove / Use with keeper KPR-50/7S
- BMW N53 Exhaust valve / 29mm(std) x 5.95 x 114.9mm/ Inconel hollow Sodium filled/ Chrome coating/Dish/ Single groove.
- BMW N54 Exhaust valve / 28mm(std) x 5.95 x 114.9mm/ Inconel / Chrome coating/Dish/ Single groove/ Use with locks KPR-6S/7 ( SET OF 12)
- BMW N54 Exhaust valve / 28mm(std) x 5.95 x 114.9mm/ Inconel / Chrome coating/Dish/ Single groove/ Use with locks KPR-6S/7.
- BMW N54/55 Conical spring kit SPR-FE20-BE-2(24) -88lbs @ 36.5mm - Rate: 7.25lbs/mm - CB @ 23.2mm lift - Max Recommended lift: 12mm - Intake RET-BMN54/TI (12) - Exhaust RET-BMN54/TE (12) - Use with Factory valve stem seal - Factory Keepers OK.
- BMW S38 Dual Valve Spring Kit- 92lbs @35.5mm / CB: 21.50mm / max lift: 14mm/ SPR-H1005 (24) + Ret-BMS14/T1 + Seat-H1002/S14
- BMW S38 Dual Valve Spring kit: 110@ 37.60mm SPR-H1022D+RET-H70/T1+SEAT-H1002-S14 (24 EACH)
- BMW S63 (V8) 32v Intake valve / 33.15mm(std) x 5.96mm x 93.7mm / Singl Groove / SS / Black Nitrided. (use with keeper KPR-6S-7)
- BMW S63 V8 32v Exhaust valve / 29mm(std) x 5.95 x 106mm / Inconel Sodium Filled/ Single Groove (use with keeper KPR-6S-7)
- BMW Series Titanium retainers to be used with H1000 Series springs.
- Buell Dual Valve Spring Kit/62lbs@1.224in /CB 0.690" - SPR-KX-450 (8) + SEAT-KX4-Buell (Use OEM retainer)
- BWM S63 V8 Conical spring kit - 83lbs @35.7mm (Ex) 80@ 36mm (in) - 165@ 10mm - 12mm max lift SPR-FE20BE-24 + RET-BMN54-TE-24 + VSI-EC60-E-24
- Cam Follower, solid, 33 x 24.50 x 5.10mml- WPC COATED
- Cam Follower 26.50mm /19mm /3.0+
- Cam Follower 32mm x 24.50mm x 3.10mm WPC COATED
- Cam Follower 32mm x 24.50mm x 3.35mm - WPC treated
- Cam Follower 35mm x 25 x 2.7+ Shim 8mm diam (Subaru)...T0043 WPC COATED
- Cam Follower 35mm x 25 x 3.7+ Shim 8mm diam..T0036 WPC COATED
- Cam Follower 37.50mm x 24.5mm x 3.1mm +SHIM
- Cam Follower 37.50mm x 24.5mm x 3.1mm +Shim - DLC COATED
- Cam Follower diam 35.75mm (bore) x 30mm long x 2.8mm thick
- Cam follower Diam 40mm x 30mm x 3.0mm thick
- Cam Follower, Cam Follower, solid, 33 x 26 x 14 mm/ 7mm Lash Caps can be installed on the bucket post.solid, 33 x 26 x 14 mm/ 6mm Lash Caps can be installed on the bucket post.
- Cam Follower, solid, 31 x 24.8 x 2.7mm
- Cam Follower, solid, 31 x 24.8 x 2.7mm (SET OF 12)
- Cam Follower, solid, 31 x 24.8 x 3.0mm WPC COATED
- Cam Follower, solid, 33 x 22 x 2.5mm
- Cam Follower, solid, 33 x 22 x 2.5mm- DLC coated
- Cam Follower, solid, 33 x 26 x 14 mm/ 5.5mm Lash Caps Cam Follower, solid, 33 x 26 x 14 mm/ 6mm Lash Caps can be installed on the bucket post - WPC TREATEDcan be installed on the bucket post - WPC TREATED
- Cam Follower, solid, 33 x 26 x 14 mm/ 5.5mm Lash Caps can be installed on the bucket post - DLC COATED
- Cam Follower, solid, 33 x 26 x 14 mm/ 5.5mm Lash Caps can be installed on the bucket post.
- Cam Follower, solid, 33 x 26 x 14 mm/ 6mm Lash Caps can be installed on the bucket post - WPC TREATED
- Cam Follower, solid, 33 x 26 x 14 mm/ 6mm Lash Caps can be installed on the bucket post.
- Cam Follower, solid, 33 x 26 x 2.92mm
- Cam Follower, solid, 33x26x2.5mm-WPC Treatmen
- Cam Follower, solid, 33x26x3.0mm- WPC treated
- Cam Follower, solid, 35x26x5.0mm
- Cam Follower, solid, 37 x 26 x 3.9mm/DLC Coating
- Cam Follower, solid, 37x26x3.68mm
- Chevy Big Block Exhaust valve 1.880x.3710x5.350" /SS/ Chrome/undercut/ Tip: .220"
- Chevy big block intake valve 2.190x .3710x5.216/SS/chrome/undercut
- CIRCLIP 18MM
- Circlip 22mm - Flatened tips - Subaru
- Circlip 23mm - Flatened tips - Subaru- wire diam 1.35mm
- Circlip 25mm for Mercedes Piston
- Conical Spring 70lbs @ 35.5mm / Rate 12.7lbs/mm.
- Custom Subaru H6 Intake Valve 37(+2) x5.48 x 103.40mm /SS/ /Dish/Undercut/Backcut.