818 764-1901     818 764-0155 fax    e-mail: topend@racetep.com

JE Forged Pistons for BMW Engines 
Forget the imitators and low price, low quality imposters. JE is the finest forged piston made for your Street or Race engine...Normally aspirated, Turbo, Supercharged, NOS..You name it and Top-End and JE can supply you a piston to fit your needs.
We are THE source for ALL BMW Forged pistons. 
OEM Parts for ALL BMW Models at Warehouse Direct Prices 
http://www.BMWCarPartz.com

Examples of Pistons we have made from Samples that were sent in to us showing what we can do for you 
Click Here for a list of Custom Options available on Made-To-Order pistons 

High Heat Ceramic Coated Crowns and Moly Coated skirts avaialble on all piston at the time of ordering for $40 per piston. This is a must for High Boost Turbo and NOS Appications 

Other lines we supply to go along with your JE Pistons. Click logo for information

BMW
We are the official JE Pistons BMW Distributor. We have the blueprints for all popular (and some not so popular) BMW engines in almost any Bore size, Compression ratio, Stroke, and Rod combination...If you call JE for BMW pistons chances are they will just refer you to us....

Car Model
Engine
Compression Ratio and bore size 
Misc
Price
2002, 320i, 1600

M10 All 1600-1800
and 2.0
Any
 We have the Hemi Alpina Dome also From $675 set with Pins, Locs and JE Pro-Seal Rings

325i 2.5 or 2.7 stroker with i head. M20 with M50
Crank shft (+10.8mm stroke). 

 M20 All 
Any
   From $995 set with Pins, Locs and JE Pro-Seal Rings
325e ETA and Super-ETA  M20 All 
Any
   From $995 set with Pins, Locs and JE Pro-Seal Rings
535,635,735 M30 All 
Any
   From $995 set with Pins, Locs and JE Pro-Seal Rings
M3 E30 Turbo and Normally aspirated, EVO
and Standard Stroke. 		 S14
Any
   From $695 set with Pins, Locs and JE Pro-Seal Rings
M3 E36 and E46 S50, S52 US and Euro and S54 
Any
   From $995 set with Pins, Locs and JE Pro-Seal Rings
318i M42 , M44
Any
   From $695 set with Pins, Locs and JE Pro-Seal Rings
M535, M5, M635
B36 / B38 / M88 
Any
   From $995 set with Pins, Locs and JE Pro-Seal Rings
325i, 328i, etc  M50, M52, M54 and S54 
Any
   From $995 set with Pins, Locs and JE Pro-Seal Rings

Upgrade to Total-Seal Gapless 2nd Rings on any set for $25.00 Per Cylinder or Total-Seal Gapless Top Rings for $38 per cylinder. 

Options: Items with * are recommended for Turbo, NOS, and High RPM Normally aspirated Endurance Racing use. 
See this page for description: http://www.racetep.com/jecustom.html#custopt

*Add $25 per piston for Total-Seal Gapless 2nd rings (Street and mild Race use)
*Add $38 per piston for Total-Seal Gapless Top rings (Endurance Road Race, Extreme Turbo and NOS Use.)
     Note: You do EITHER Gapless Top or Gapless 2nd. NOT Both.
*Add $43 per piston for High Heat Ceramic Coated crowns and Moly coated skirts 
*Add $15 Per piston for Lightweight or Heavy Duty Wrist Pins
Add $25 Per piston for extreme lightening (Normally aspirated High RPM use only. Not for turbo or NOS) 
Add $18-$25 per piston for FSR Forgings. (Limited to certain bore sizes and applications only.)
Add $22 Per piston for Lateral Gas Ports (For Drag Race and High Compression engines, also good for NOS use.)
*Add $8 per piston for Contact Reduction Grooves
Add $6 per piston for Accumulator grooves
Add $4 per Piston for Double Pin Oilers

All BMW pistons are made to order and order time is usually 3-4 weeks. We have many of the Euro piston blueprints as well as the US models...In some cases if it is a dome that we do not have a profile for we may require a sample to make them but we have been able to make 90+% of the requested pistons just from our extensive library of BMW Blueprints and Job #'s. We recommend Total-Seal Gapless rings on all BMW sets. Please see our BMW page for more BMW Performance information. http://www.2002performance.com

OEM Parts for ALL BMW Models at Warehouse Direct Prices 
http://www.BMWCarPartz.com

Porsche (NEW)

 

JE Pistons are the finest quality aftermarket forged pistons available. The special 2618 aircraft alloy allows much tighter Piston-To-Wall clearances ( Typically .0035-.0045 )than all the other manufactures. This means a quiet street engine that does not need excessive temperatures to seal.

We are proud to be a JE Warehouse Distributor and can supply you with pistons for any Import engine at the best possible price. We will not be undersold on any shelf stock piston from JE. In addition to the shelf stock pistons that JE offers we can custom make you a piston for almost any application..Big bores, Turbo or NOS, Strokers, whatever you want, we can probably make it. Check our Custom Piston Order page for more information

As one of JE's biggest distributors we have very good order time on all custom sets...Our orders get priority and that means you will get your parts faster....Typically a custom set from us takes 3-4 weeks and sometimes even faster....If your piston has to be made from a sample it may take a little longer....Rush and Expedited orders are available for those engine emergencies. There is an extra fee for Rush orders but sometimes you just need them faster.... 

Click here to access our Custom Piston Quote Form.... We will get back to you with a price shortly.....